YagiCAD

DL6WU long-Yagi calculator with CAD export
← shiphipanicker.com

Design parameters

MHz
mm
mm
mm
Extra boom behind the reflector and past the last director. Elements are fitted in the remaining length.
Elements
–
Wavelength
–
Boom corr.
–
Drag to orbit · scroll or pinch to zoom · right-drag to pan

Cut list

ElementLengthPositionSpacing

CAD export

  • .stepSolid model, one body per element. Opens in SolidWorks, Fusion, Onshape, FreeCAD, Inventor.
  • .stlMesh for 3D printing jigs or previewing.
  • .FCMacroRebuilds the model parametrically in FreeCAD.

Method. Element spacing and lengths follow the DL6WU long-Yagi tables, with linear interpolation between element-diameter rows and between the tabulated director numbers. The boom correction comes from DL6WU's curve (a fraction of the boom diameter, added to each element): full correction for bonded through-boom elements, half for bonded elements on top of a round boom, 5% for elements insulated from a metal boom, and none for a non-conductive boom.

Coordinates. Millimetres. The boom runs along +Y, so the antenna points +Y. The reflector is at Y = 0 and the elements are centred on X = 0.

Before you cut. The driven element length is a starting point. Your feed (folded dipole, gamma match, split dipole) sets the final length, so trim it for best SWR. Check the parasitic lengths against a second calculator or a NEC model before committing expensive material.